On this page
Refresh remote control
The Hubbl remote may need a refresh.
- Wipe the front of the remote firmly to unstick any buttons and remove any dirt.
- Tap both sides of the remote on the palm of your hand to remove any loose dust or dirt.
Reboot the remote control:
- Remove the battery cover from the back of the Hubbl remote.
- Refresh the batteries by taking them out and inserting them again.
- Press and hold the 1and 3buttons together on the remote for 3 seconds.
Restart device
Restart Hubbl Hub
- Switch the Hubbl Hub off at the wall and after 30 seconds, switch it back on again. You do not need to unplug it.
- After a few seconds, you'll see the Hubbl logo on screen and the red or white standby light will come on.
- On the Hubbl remote, press the Home button to launch the home screen.
Restart Hubbl Glass
- Switch the TV off at the wall and after 30 seconds, switch it back on again. You do not need to unplug it.
- After a few seconds, you'll see the Hubbl logo on screen and the red or white standby light will come on.
- On the Hubbl remote, press the Home button to launch the home screen.