Change a WiFi network on Hubbl Glass

On this page

• Remove an existing WiFi network
• Connect to a WiFi network

To get the most out of the Hubbl Glass, you’ll need to be connected to the internet. For help with connecting to a network, or removing an existing network, follow the steps below.

1. Go to Settings by either scrolling down from the home screen, or using voice search.
2. Select Network.
   
   
3. While Network connection is highlighted, press right on your remote.
4. Press right again to the Reset button.
   Note:The device will check the quality of your current network and ask if you’re sure you want to reset it.
   
   
5. Select Confirm.
   
   

Connect to a WiFi network

1. Go to Settings by either scrolling down from the home screen, or using voice search.
2. Select Network.
3. Select Connect to WiFi.
   
   
4. Select your WiFi network from the list.
5. Use the character wheel to enter your WiFi password.
   Tip:You can use the number buttons on your remote to enter the password.
   
   
6. Once you’ve finished entering your password, select Confirm.
7. Once your network is connected, press the Home button on your remote to get back to using Hubbl.